Capsule coffee machines will grow by 32% in North America in 2022-2026, however, Europe and Asia Pacific will grow at a faster rate than North America, driven by new product launches and increased investment, leading to capsule coffee machine forecast growth.

This predictable interval healthy growth of CAGR14.67% in 2021-2026, while the forecast growth reaches USD11.77 billion. The capsule coffee machine shell, operation buttons, and capsule mouth are mainly plastic accessories, which are small, light, and easy to operate, making the capsule coffee machine favored by young people.

Post-processing of plastic parts

Annealing treatment of plastic parts - plastic parts are placed in an oven at a certain temperature or in a liquid medium (such as hot water, hot mineral oil, glycerin, ethylene glycol, and liquid paraffin, etc.) for a while, and then slowly cooled. The annealing temperature is generally controlled at 10~20°C higher than the service temperature of the plastic part or 10~20°C lower than the plastic thermal deformation temperature.

Humidity conditioning treatment of plastic parts - put the newly demolded plastic parts (polyamide) in hot water to isolate the air, prevent oxidation, eliminate internal stress, accelerate the equilibrium of moisture absorption, and stabilize its size. The temperature of the humidity conditioning treatment is generally 100~120 °C, and the time of the humidity conditioning treatment depends on the type of plastic, the shape of the plastic part, the wall thickness, and the degree of crystallinity.